Visual Comfort Architecture

Extends from the wall, to support the rail.Width: 1.00"Height: 36.00"Weight: 0.60 lb, Included

A direct-end power feed brings power from a remote transformer to the rail at an end of the run and mounts to a wall perpendicular to the run.Width...

Heavy duty standoffs support Kable Lite systems that drop 18" or 24" from the ceiling.Width: 4.00"Height: 24.00"Length: 4.00"Weight: 3.40 lb, Included

Pair of field-cuttable, hand bendable hardwire feeds to replace standard feeds.Width: 0.05"Height: 24.00"Length: 0.05"Weight: 0.10 lb, Included

Connectors join cables end to end.Width: 1.00"Height: 0.30"Length: 0.30"Weight: 0.05 lb, Included

This single-feed flush transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Wall MonoRail low...

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately).Width: 2.00"Height: 4.0...

End power feeds are generally used to bring power to a MonoRail system when the transformer or canopy cannot be located directly above the run.Widt...

Bare cable is #10 gauge tin-plated copper cable.Width: 0.10"Height: 0.10"Length: 0.10"Weight: 0.15 lb, Included

This single-feed flush transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a MonoRail low-volt...

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately).Width: 2.00"Height: 2.0...

Clear plastic tubing insulates bare cable from another cable or metal.Width: 1.00"Height: 1.00"Length: 1.00"Weight: 0.10 lb, Included

Includes 100 Watt electronic driver (120V-277V input | 24V DC output).Width: 5.00"Height: 2.85"Length: 5.00"Weight: 2.50 lb 100.00W, Included

Pair of power jumpers transfers power from one cable run to another.Width: 0.30"Height: 1.30"Length: 0.30"Weight: 0.25 lb, Included

Hardware used to mount turnbuckles and anchors to a brick or cement surface.Width: 0.50"Height: 0.50"Length: 0.50"Weight: 0.15 lb, Included

These conductive connectors join sections of rail together end to end at desired vertical angle.Width: 3.00"Height: 2.00"Length: 3.00"Weight: 0.10 ...

Use to change a low-voltage pendant's point of suspension to any point on the ceiling.Width: 1.50"Height: 0.80"Length: 1.50"Weight: 0.05 lb, Included

Isolating connectors join sections of rail and isolate power feeds from each other.Width: 1.10"Height: 0.30"Length: 1.10"Weight: 0.01 lb, Included

A wall turn attaches to a surface to make simple turns.Width: 1.00"Height: 0.50"Length: 0.50"Weight: 0.20 lb, Included

Special Wall MonoRail standoff positions rail 1" from the wall.Width: 1.30"Height: 1.30"Length: 1.30"Weight: 0.20 lb tbn

Adapts almost any FreeJack head to VC Modern's Wall MonoRail system (see element for details).Width: 1.10"Height: 1.40"Length: 1.10"Weight: 0.20 lb...

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look.Width: 1.80"Height: 2.50"Length: 2.50"Weight: 0.50 lb,...

Joins two Unilume LED Slimline Jumper Connectors together.Width: 0.50"Height: 0.50"Length: 0.50"Weight: 0.20 lb, Included

Required for Unilume Slimline hardwire applicationsWidth: 2.80"Height: 0.85"Length: 2.80"Weight: 0.25 lb, Included

Can be used to plug one Unilume Slimline Housing directly into a 120v outlet.Width: 1.00"Height: 1.00"Length: 1.00"Weight: 0.25 lb, Included

The "T" connector joins three pieces of MonoRail to form a "T".Width: 3.00"Height: 1.80"Weight: 1.00 lb, Included

Use to change a line-voltage pendant's point of suspension to any point on the ceiling.Width: 1.50"Height: 0.80"Length: 1.50"Weight: 0.25 lb, Included

For short, straight runs (runs under 20').Width: 1.50"Height: 1.00"Length: 1.00"Weight: 0.15 lb, Included

For short, straight runs (runs under 20').Width: 1.50"Height: 1.00"Length: 1.00"Weight: 0.15 lb, Included

Colorful translucent round glass.Width: 2.30"Height: 1.90"Length: 1.90"Weight: 0.15 lb

Mounts to ceiling.Width: 5.50"Height: 2.50"Length: 5.50"Weight: 0.25 lb, Included

16' cord and plug for standard 120V power outlets.Width: 1.00"Height: 1.00"Length: 1.00"Weight: 1.00 lb, Included

The "X" connector joins four pieces of MonoRail to form an "X".Width: 3.00"Height: 1.80"Weight: 1.00 lb, Included

To install a MonoRail system to a vaulted ceiling, add a standoff vault adapter to each standoff.Width: 6.00"Height: 1.60"Weight: 0.25 lb, Included

To install a MonoRail system to a vaulted ceiling, add a power vault adapter to each power feed.Width: 0.60"Height: 1.60"Length: 0.60"Weight: 0.10 ...

Add to power feed canopy or surface transformer to drop power from ceiling.Width: 0.50"Height: 3.00"Length: 0.50"Weight: 0.25 lb, Included