Visual Comfort Architectural

Bare cable is #10 gauge tin-plated copper cable.Width: 0.10"Height: 0.10"Length: 0.10"Weight: 0.15 lb, Included

Hardware used to mount turnbuckles and anchors to a brick or cement surface.Width: 0.50"Height: 0.50"Length: 0.50"Weight: 0.15 lb, Included

Clip on connectors or bars to provide support anywhere along the run.Width: 0.35"Height: 1.50"Length: 1.25"Weight: 0.20 lb, Included

Mounts to any connector to provide additional support.Width: 1.00"Height: 1.10"Length: 1.00"Weight: 0.20 lb, Included

Blank Bars are great options for design versatility. Blanks provide unilluminated sections of the system and can connect to illuminated bars (light...

Wall Connector provides design flexibility to mount light bars on wall or ceiling. To accomodate all design needs, connectors are available in vari...

End caps are requred to finish each run.Width: 0.90"Height: 1.00"Length: 1.00"Weight: 0.20 lb, Included

Light bars can be mounted vertically or horizontally and rotate 360 degrees to aim light in your preferred direction. Use connectors to link multip...

Includes 100 Watt electronic driver (120V-277V input | 24V DC output).Width: 5.00"Height: 2.85"Length: 5.00"Weight: 2.50 lb 100.00W, Included

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately).Width: 2.00"Height: 4.0...

Connectors join cables end to end.Width: 1.00"Height: 0.30"Length: 0.30"Weight: 0.05 lb, Included

This single-feed flush transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Wall MonoRail low...

Hexcell louver cuts glare from lamp.Width: 0.05"Height: 2.00"Length: 2.00"Weight: 0.25 lb, Included

Decorative end caps fit into ends of MonoRail run for a finished look.Width: 0.30"Height: 0.30"Length: 0.30"Weight: 0.01 lb, Included

End power feeds are generally used to bring power to a MonoRail system when the transformer or canopy cannot be located directly above the run.Widt...

Mounts to a standard 4" junction box with round plaster ring (provided by electrician).Width: 4.00"Height: 0.50"Length: 4.00"Weight: 2.00 lb 60.00W...

This single-feed flush transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a MonoRail low-volt...

Minimal 1-1/2" diameter, 2-1/2" deep.Width: 0.20"Height: 2.50"Length: 2.00"Weight: 0.50 lb 60.00W, Included

4" round and 4" square canopies mounts to a standard 4" junction box with round plaster ring (provided by electrician).Width: 4.40"Height: 0.80"Len...

Pair of field-cuttable, hand bendable hardwire feeds to replace standard feeds.Width: 0.05"Height: 24.00"Length: 0.05"Weight: 0.10 lb, Included

Heavy duty standoffs support Kable Lite systems that drop 18" or 24" from the ceiling.Width: 4.00"Height: 24.00"Length: 4.00"Weight: 3.40 lb, Included

Insulated cable is #10 gauge, tin-plated copper cable sheathed in clear insulation.Width: 0.16"Height: 0.16"Length: 0.16"Weight: 0.15 lb, Included

Clear plastic tubing insulates bare cable from another cable or metal.Width: 1.00"Height: 1.00"Length: 1.00"Weight: 0.10 lb, Included

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run.Width: 2.50"Height: 24.00"Length: 3.60"Weight: 1.10 lb, Included

The Lil Wok Shade by VC Modern provides a pleasant visual enhancement to several of our task heads. Available in modern finishes. Installation is s...

Snaps on front of MR16 lamp to hold a single lens or louver.Width: 0.10"Height: 2.00"Length: 0.10"Weight: 0.01 lb, Included

Low-voltage conductor of two individual conductive metal pieces fused together by a plastic separator.Width: 0.30"Height: 0.60"Length: 24.00"Weight...

A direct-end power feed brings power from a remote transformer to the rail at an end of the run and mounts to a wall perpendicular to the run.Width...

A direct-end power feed brings power from a remote transformer to the rail at an end of the run and mounts to a wall perpendicular to the run.Width...

A dual-feed canopy is mounted to the ceiling above the MonoRail run.Width: 4.00"Height: 2.50"Length: 4.00"Weight: 0.95 lb, Included

The MonoRail Low-Profile Power Feed Canopy allows for the closest-to-ceiling possible mounting of a MonoRail run.Width: 4.50"Height: 1.00"Length: 4...

A single-feed canopy is mounted to the ceiling above the MonoRail run.Width: 4.50"Height: 2.00"Length: 4.50"Weight: 0.95 lb, Included

Center Power Feeds are generally used to bring power to a MonoRail system when the transformer or canopy cannot be located directly above the run.W...

Conductive connectors join sections of rail together end to end and are included with all MonoRail pieces.Width: 1.10"Height: 0.30"Length: 1.10"Wei...

These conductive connectors join sections of rail together end to end at desired sharp horizontal angle.Width: 3.00"Height: 2.00"Length: 3.00"Weigh...

These conductive connectors join sections of rail together end to end at desired vertical angle.Width: 3.00"Height: 2.00"Length: 3.00"Weight: 0.10 ...